Are you in the market of buying a wheeled jump starter? I have reviewed the best portable jump starters that you can use in your car dealership, mechanic shop or at home. What’s best about these wheeled jump starters is that even though they are robust, they can be easily moved around and they have long jumping cables that come in handy.
The list below consists of the best wheeled jump starters for your car, van, truck, RV and motorcycle.
Top 3 Best Wheeled Jump Starters
|SOLAR 2001 Wheeled Jump Starter|
|Schumacher DSR131 Wheeled Jump Starter|
|6002B Wheeled Jump Starter|
1. SOLAR 2001 Wheeled Jump Starter/Charger
This wheeled jump starter/charger was created by a company called SOLAR. It is early to say, but I already like this jump starter.
The solar 2001 wheeled jump started/charger is perfect for you if you run an auto dealership, auto auctions, or a mechanic shop. It is made to last. I personally think that this is one of the best wheeled jump starters.
- Has an built-in automatic 10 amp battery charger.
- The jumper cables are retractable and are 5 feet long or 1.5 meters.
- This jump starter has a 120v outlet.
- The wheels are solid steel and the tires are pneumatic.
- Weights 68 lbs or 30 kilograms.
- 12 Volt cold cranking amps (but this will depend on the battery of course).
Durability: Sits in a heavy duty case and 9 inch wheels made of solid steel.
How To Operate The SOLAR 2001 Wheeled Jump Starter/Charger
You should always keep this unit plugged when not using. Once you decide to use it make sure you unplug it first. Do not use it if its plugged.
Working around lead-acid batteries can sometimes be dangerous. You should avoid smoking or using a cigarette lighter when you are near batteries.
Always wear eye protection and other safety equipment while working with lead-acid batteries. Also, avoid touching your eyes once you’ve touched the batteries.
Always return the jumper cables into their proper positioin. If you leave the cables laying on the ground, they might get damaged.
Which Battery Is Good For 2001 Solar Wheeled Jump Starter
As I mentioned before, this unit does not come with a battery, but needs one. So, which battery is good for the 2001 solar wheeled jump starter/charger?
The 2001 model needs a high quality battery in order to last longer and perform better. Best choice battery will be the ones with a sealed top or with screw type flush fill caps. This will prevent acid leakage if the jump started is laid flat or turned over by accident.
Get a battery with 3/8” threaded studs. The good thing about high quality batteries is that they emit less gases when recharging. This type of battery will extend the charger and wiring life (check prices on amazon.com). Also, check the battery water level every 3-4 months and add if needed.
How To Install Battery in a Wheeled Jump Starter/Charger
Here is how to install battery in a wheeled jump starter/charger:
- Remove the back panel of the unit.
- Place the battery with negative terminals facing inwards.
- Connect the negative (-) jumper cable with the negative (-) terminal on the battery.
- Slide the battery in the unit. The battery will slightly drop down when fully inserted.
- Connect the positive (+) jumper cable with the positive (+) terminal on the battery.
- Install the back panel.
- At this point, the volt gauge should read between 12.5 and 14 volts.
- Plug the AC cord to charge the battery. It should take around 3 seconds for the amp gauge to apply charge rate.
- When the amp gauge starts to flicker, the battery is full and ready to use.
- UNPLUG the unit before you use it. Never use it while plugged.
How To Jump Start a Car Using The Wheeled Jump Starter/Charger
If you are not sure how to jump start a car using the wheeled jump starter, read the following text.
- Open the hood of the car and place the wheeled jump starter near the car.
- Make sure that the wheeled jump starter is unplugged.
- Always position the jumper cables so they stay clear of fan belts, pulleys or any moving engine parts.
- Connect the positive jumper cable (+) to the positive (+) terminal on the car battery.
- Connect the negative jumper cable (-) to a heavy gauge metal part of the frame or engine block.
- Turn on the ignition and start the vehicle.
- If the vehicle isn’t running after 6 seconds, leave it to rest for about 3 minutes before attempting to jump start it again.
- Always disconnect the negative jumper cable first and then the positive.
For more detailed explanation, we have a step by step article: How Do I Jump Start My Car?
2. Schumacher DSR131 Wheeled Jump Starter/Charger
This wheeled jumper starter/charged is manufactured by a company called Schumaher.
This unit charges standard, AGM and gel and deep-cycle batteries with 250A (12V) and 125A (6V). Great for SUVs, trucks, cars and RVs. If you run a car dealership or a mechanic shop, this unit is great for you. This jump starter has a 120v outlet.
- Charges 6V and 12V car batteries.
- Standard, AGM, Gel, Deep-cycle batteries.
- 120V AC input voltage.
- Digital display with push-buttons.
- 12-feet or 3.6 meters reach.
- Heavy-duty 300A jumper cables.
- Automatic amperage rate adjustment.
- Weights 33 lbs or 15 kilograms.
- 2 year warranty.
Durability: Has a hard plastic case to ensure durability and pneumatic wheels for easy relocation.
How To Operate The Schumacher DSR131 Wheeled Jump Starter/Charger
Before doing anything, you should always read the manual instructions. The schumacher wheeled jump started/charger is pretty easy to use, but there are some things that you need to know before you use it.
As we all know, operating around lead-acid batteries could be dangerous and you should always avoid smoking or using a lighter around them. Always wear safety equipment such as glasses and gloves.
The unit is not water proof, so please use it outdoors only if its dry.
Never use the unit if any of the wiring is damaged. If you see a damaged cord or plug, replace it before immediately. While the battery charges, it emits gases that could damage the cables, so make sure you never place them above the battery. Also, do not use an extension cord unless it is absolutely necessary.
Do not use the wheeled jump starter/charger if its plugged into an AC outlet. Always make sure that it is disconnected.
Before you connect the jump starter/charger to the drained battery, make sure that it is turned off. Attach the power cables to the terminals (+) with (+) and (-) with (-) and push START. It would need from 1.5 to 4 hours to charge a dead battery.
How To Jump Start a Vehicle Using The Schumacher DSR131 Wheeled Jump Starter/Charger
Jump starting a vehicle using the Schumacher wheeled jump starter/charger is done in couple of steps:
- Place the unit near the vehicle and open the hood.
- Make sure that the jump starter is not plugged in an AC outlet.
- Connect the positive + cable on the + terminal of the car battery.
- Connect the negative – cable to some metal part of the vehicle such as metal sheet or engine block.
- Make sure that non of the cables are near a fan or any moving part which may damage them once the vehicle is running.
- Try starting the vehicle. If the vehicle doesn’t start after 6,7 seconds, try again after 3 minutes.
- When the car starts running, disconnect the negative cable first.
If you need detailed instructions please see here: How Do I Jump Start My Car?
3. 6002B Wheeled Jump Starter/Charger by Associated Equipment
This wheeled jump starter/charged is manufactured by company called Associated Equipments. Probably the best wheeled jump starter on the market.
First of all, I love this unit because it is waterproof which means you can use it outdoors without worrying if its gonna rain. This jump starter comes with a 120v outlet. I think this is one of the best wheeled jump starters.
- Works with 6V, 12V, 18V and 24V – 100/80/50/40 AMP batteries.
- Works in any weather conditions.
- Integrated cooling system.
- Made in the USA.
- Weights 68 pounds or 30 kilograms.
Durability: Has a metal waterproof case and rugged 7 inch tires.
How To Operate The 6002B Wheeled Jump Starter/Charger by Associated Equipment
Same as the other jump starters, this equipment should be operated with caution.
Never use the jump starter if you notice any damage cords or cables. Replace them immediately. Also, if the unit somehow gets damaged by a drop or hit, get it checked out before using it again.
Always unplug the charger from the outlet before using the jumper starter to avoid the risk of electric shock.
When you are charging a battery that is not attached to a car, always make sure that the jumper cables are not directly above the battery, because when charging, the battery emits gases that can damage the cables. Connect the positive cable to the positive terminal of the battery and negative cable to the negative terminal and you should get a green light on the display which means the connection is correct.
Check the battery water levels and add if needed.
How To Jump Start a Vehicle With The 6002B Wheeled Jump Starter/Charger
Jump starting a vehicle with the wheeled jump starter consists of few steps. Before starting make sure that you don’t smoke cigarettes around the battery.
- Park the jump starter near the car and open the hood.
- When connecting the jump cables, make sure they are not in a way of a moving part of the engine that could damage them during the jump starting.
- Attach the positive jump cable to the positive terminal of the car battery.
- Attach the negative jump cable to a metal surface on the car. Do not attach it to a carburetor or a pipe.
- Turn on the jump starter and turn on the car ignition.
- If the vehicle isn’t running after 6 seconds, try again after 3-4 minutes.
- When disconnecting the cables, make sure to disconnect the negative jump cable first.
For more detailed instructions, please see: How Do I Jump Start My Car?
Best Portable Jump Starter For Vans
Almost all vans use a 12 Volt batteries, so the ideal portable jump starter for van should be able to have a capacity to jump start a 12V battery. There are many portable jump starters on the market, but which jump starter is the best? Here is my best pick.
Jump-N-Carry 12 Volt Jump Starter
Are you wondering which jump started you need? This portable jump starter is ideal for a van 12V battery. Has a capability of 1700 peak amps and 425 cranking amps. There is a voltmeter which tells you the status of the battery. There is a DC outlet to charge the jump starter.
This jump starter for vans is built out of robust materials with a goal to jump start any 12V dead battery with the 2 AWG cable leads with 68” length and industrial grade clamps.
How To Operate The Jump-N-Carry 12V Jump Starter
Before operating any piece of equipment, you must always read the instructions manual.
Working around lead-acid batteries could be a bit dangerous. That’s why you should never smoke while jump starting your van. If you are jump starting your van in the night, make sure that you have a flash light and not a lighter. Talking about safety, wear protective gear like googles and gloves if possible.
The jump-n-carry portable jump starter provides more than enough power to jump start most vans. There is a status gauge which tells you the status of your battery. If the light is green, the unit is ready for jump starting. A yellow and red light indicates that the battery needs to be charged. It usually takes from 20 minutes up to 5 hours to charge, depending on how much you used it. The cables are mounted on the sides and are very accessible. Make sure to always put the cables back in the storing position once you are finished with jump starting. The unit is sealed and you can store it in any position.
Jump Starting Instructions
- Make sure that your jump starter battery is full.
- Place the jump starter securely into the engine bay.
- Double check to make sure that the jump starter is turned OFF.
- Place the positive + cable to the positive + terminal of the van battery.
- Place the negative – cable to a metal part of the engine block.
- Turn on the portable jump starter.
- Try to turn the car on. If the car doesn’t starts after 10 seconds, try again after 3 minutes.
- When done, remove the negative cable first, then the positive.
- Recharge your portable jump starter for next use.
How Jump Starters Work?
Portable jump starters are probably one of the easiest way to start a vehicle with a dead battery and could be the ultimate emergency tool to have in your vehicle. Here is how you can safely use a portable jump starter and have it for a long time:
The biggest consideration with owning a jump starter is around charging. Portable jump starters require charging before first use and you need to ensure they have enough charge every time you use them. Just to be sure I recommend that you fully charge them after every use. Charging time depends on three different factors:
- The size of the jump starter
- The size of the engine being jump-started
- How many times the vehicle was jump-started.
Check the product manual included in the box or online for charging time. From completely dead it could take up to 5 hours. The battery on a jump starters have been designed to be left on without overcharging the batteries. Leave them on for a day, a week or even months or use the twelve volt charging option and your jump starter will always be ready to go when you need it.
Commonly asked question is where to charge a jump starter. Make sure that you always charge your portable jump starter battery in a ventilated area because the battery emits gases which are not very healthy.
How To Jump Start a Vehicle
- Bring the jump starter as close as possible to the dead battery. If your engine bay is big enough, you can put it there. Just make sure that the cables are not caught into a moving part.
- Before you connect the jump starter to the battery, make sure that it is switched off. With the unit off the reverse polarity alarm will sound if you connect the cables around the wrong way.
- Connect the + cable to the + terminal on battery and connect the – cable to a metal part of the vehicle.
- With everything connected correctly switch the jump starter into the on position and proceed to start the vehicle as normally.
- If the vehicle doesn’t want to start after 10 seconds, give it another try after 3 minutes.
- Once you get the car running, leave it connected for 5 minutes.
- Switch the jump starter off and disconnect the jump starter in reverse.
- Clip the cables back in the holder so it’s safe for transport.